For use in hoisting/lifting applications without a mechanical load brake and with a conical-rotor hoist motor (requires an encoder for closed-loop control) up to 30 HP at 460V (45 A max).
Add one of the resistors listed below to your quote request unless one of the exact models shown is already installed in your application.
Important note regarding Encoders and Pulse Count selection: Many conical-rotor motors used in a hoist application have a BUILT-IN (low ppr count) encoder. In this case, you do not need to select an encoder option below (you should also leave the Encoder Pulse Count option as “Standard”).
However, if your motor DOES NOT have an existing encoder, you will need to supply and mount one on the motor. If you will be adding one of the PE® encoder options shown here, make sure you also select the “P2” model option for the MMV-CRH. Contact PE® if you are unsure.
Select Product Options
|Dimensions||18 × 12.31 × 9.63 in|
Variable Frequency Drive
|Max HP (kW) @ 460VAC||
30 HP (22 kW)
|Max Amps (FLA)||
|Min Amps (FLA)||
|Motor Motion Type||
Hoisting / Lifting with a CONICAL-ROTOR hoist motor
|Motor Control Type||
Closed-loop, vector speed control
Five distinct, adjustable speed inputs (+2 programmable aux inputs); numerous available control modes including infinitely variable. Also includes extra inputs for analog control modes.
|Control Voltage (select one)||
110V (standard), 24V, Other voltage (specify)
|Encoder Pulse Count (select one)||
Standard (low ppr count), P2 (high ppr count; >100)
Ambient: 14°F to 140°F (-10°C to +60°C) standard. Best in Class! Storage: From -4°F to +158°F (-20°C to +70 °C)
|External Regen. Resistor Required?||
Yes, regen resistor required for no-load-brake hoisting/lifting applications. Select resistor sizing based on CMAA Duty Rating requirements.
|Pair with Regen Resistor Model(s)||
d2, See "Support and Downloads" area for a downloadable dimensional file
Would you like this product installed in an electrical enclosure or control panel?
No load-brake on your hoist, but don’t have a conical rotor hoist motor? View our MV-U™ models instead.
Does your hoist have a separate mechanical load brake (or a self-locking worm gear)? Use the comparable MX-Ultra™ (Open-Loop) model instead.
Add heavy-duty conformal coating to provide extra environmental protection for this unit: