|
|
|
|
| ||
| SHOWN ABOVE - MMV30046H - Multi-Vector™ MV® variable speed A.C. drive for no load brake style hoists- standard version 300HP 460VAC Drive. | |||
With PE’s world renowned reliability and quality allow these drives to ANSWER the question: “when is somebody going to make a reliable vector drive that doesn’t require a course in rocket science to use or install?” The answer is that Power Electronics' has succeeded and the drive is the Micro-speed® Multi-Vector™ MV®!
Micro-speed® Multi-Vector™ MV
® series A.C. variable speed drives for “No Load Brake” style hoists are the finest hoist control systems available. With Gang-Set® instant programming, all internal braking electronics (no expensive extra “modules” to purchase-resistors external), no external interface cards to fail, very robust hardware and software all make the MV® drive the answer for you. Available now for new and retrofit hoists.Use the Micro-speed® CX, Smart-Move® variable speed drives or the Smooth-Move® soft-start controls for the bridge and trolley motions. Complete standard and custom control panels are available for your application.
MMV
Standard Version (As of January 2007 847-428-9494 up to 300hp / Larger HP sizes to follow)
Complete control panels available
*For hoists without mechanical load brake
The ONLY drive designed exclusively for no
load brake hoist control!
Robust hardware, able to withstand high vibration –
steel and aluminum housing
(not plastic), Teflon and silicon rubber
coated wire, many epoxy mounted devices.
Robust electronics – not a “General Purpose” drive
with minimum component specs.
Exclusive 300% current output for maximum motor
torque
Gang-Set® programming –
sets up in minutes not hours or days!!!!
Low set up and maintenance time!
No extra cards or power modules
required – integrated into the drive itself!!!!
Crane and Input diagnostics for up to 396 external
event code
storage history
Quadrature differential line driver encoder inputs
with 12vdc supply
2 analog inputs including a 10vdc power supply if
needed
Separate thermal overload
input for external sensing
Brake control output relay
Programmable to needs form C relays
4 Programmable to needs auxiliary
inputs for limit switches, slow downs, special speed points and
more
5-speed inputs can be set for
numerous control possibilities including infinitely variable (with
deceleration in the down direction), etc.
Special features programming available at PE (upon
application)
High Temperature: Rated to +60 Degrees C!
AND MORE!
*(requires quadrature encoder
and separate electric motor brake on hoist)
MMV_X
Extended
Version
Coming Soon!
With even more features!
(If you need a
special feature you would like to see contact
PE)
MMV__CRH
Version for hoists with conical or pull rotor motors.
Quadrature encoder required. Call with your specifications.
(Example: can be
used on Demag DH series wire rope hoist with conical rotor
motor)
All material presented on this website is subject to change
without notice. If you have any questions please direct them to 
is a registered trademark of Power
Electronics International Inc.